Delta Hull Pressed boats

Truck - Open boat

line_spacer

Solid, Strong, and Tough the Stessl Truck revels in inshore and close offshore waters.

This unpainted Aussie icon got is name for good reason - its built like a truck.

The standard open layout with a full straight through carpeted floor gives you heaps of room to load up all your gear for a day on the water.

Underfloor floatation and the recently updated reverse chine hull has dramatically improved the ride and performance of the Truck and the combination of fully welded side decks, 3mm rolled ribs spaced at 300mm and a checker plate foredeck make these a versatile plate sided boat.

Standard features include bow and stern rails, anchor shelf and deluxe Stessl pedestal seats with four seat positions and an extensive range of options are available – please discuss your requirements with your local friendly dealership.

colorpicker-banner-button-desktop.jpg colorpicker-banner-button-mob.jpg

Series

All boats shown with display props and/or options. Refer to the standard features or your dealer for options. Measurements and weights subject to variation and should be used as a guide only.

4.25m Truck Specs

Length Overall 4.25m
Length Bow to Transom 4.25m
Beam 2.05m
Depth 1.1m
Bottom Sheet 3mm 5052 Marine Grade
Side Sheet 3mm 5052 Marine Grade
Transom L/S
Weight (boat only) 255kg
Horsepower Rec. 40hp
Horsepower Max 50hp
Pax 4 ppl

Standard Features

  • 3MM PLATE SIDES AND BOTTOM SHEETS
  • CHECKER PLATE FOREDECK
  • FULLY WELDED EXTRUDED SIDE DECKS
  • RIBS SPACED EVERY 300MM
  • PEDESTAL FOLDING SEATS X 2
  • PLUG IN SEAT POSITIONS X 4
  • BOW RAILS AND BOW ROLLER
  • SIDE RAILS
  • FULLY CARPETED CHINE TO CHINE FLOOR
  • UNDERFLOOR FOAM FLOTATION

 

  • ANCHOR SHELF WITH TIE OFF POINT
  • GUNWALE RUBBER
  • TRANSDUCER BRACKET
  • DRAIN BUNGS X 2
  • TRANSOM STRUT
  • BILGE PUMP BRACKET
  • WELDED DECK CLEAT
  • LARGE BOW EYE
  • UNPAINTED 
  • MODEL DECALS
  • AUSTRALIAN BUILDERS PLATE

Popular Options

  • PAINT INTERNAL AND EXTERNAL
  • TWO TONE PAINT
  • REAR STEP AND RAIL
  • FULL BOW RAILS
  • MOTOR WELL
  • FRONT CASTING DECK
  • REAR CASTING DECK
  • CHECKER PLATE FLOOR
  • UNDERFLOOR FUEL TANKS
  • ELECTRIC MOTOR BRACKET

All boats shown with display props and/or options. Refer to the standard features or your dealer for options. Measurements and weights subject to variation and should be used as a guide only.

4.45m Truck Specs

Length Overall 4.45m
Length Bow to Transom 4.4m
Beam 2.05m
Depth 1.1m
Bottom Sheet 3mm 5052 Marine Grade
Side Sheet 3mm 5052 Marine Grade
Transom L/S
Weight (boat only) 280kg
Horsepower Rec. 50hp
Horsepower Max 50hp
Pax 4 ppl

Standard Features

  • 3MM PLATE SIDES AND BOTTOM SHEETS
  • CHECKER PLATE FOREDECK
  • FULLY WELDED EXTRUDED SIDE DECKS
  • RIBS SPACED EVERY 300MM
  • PEDESTAL FOLDING SEATS X 2
  • PLUG IN SEAT POSITIONS X 4
  • BOW RAILS AND BOW ROLLER
  • SIDE RAILS
  • FULLY CARPETED CHINE TO CHINE FLOOR
  • UNDERFLOOR FOAM FLOTATION

 

  • ANCHOR SHELF WITH TIE OFF POINT
  • GUNWALE RUBBER
  • TRANSDUCER BRACKET
  • DRAIN BUNGS X 2
  • TRANSOM STRUT
  • BILGE PUMP BRACKET
  • WELDED DECK CLEAT
  • LARGE BOW EYE
  • UNPAINTED 
  • MODEL DECALS
  • AUSTRALIAN BUILDERS PLATE

Popular Options

  • PAINT INTERNAL AND EXTERNAL
  • TWO TONE PAINT
  • REAR STEP AND RAIL
  • FULL BOW RAILS
  • MOTOR WELL
  • FRONT CASTING DECK
  • REAR CASTING DECK
  • CHECKER PLATE FLOOR
  • UNDERFLOOR FUEL TANKS
  • ELECTRIC MOTOR BRACKET

All boats shown with display props and/or options. Refer to the standard features or your dealer for options. Measurements and weights subject to variation and should be used as a guide only.

4.65m Truck Specs

Length Overall 4.65m
Beam 2.20m
Depth 1.20m
Bottom Sheet 3mm
Side Sheet 3mm
Transom Long Shaft
Weight (boat only) 350kg
Horsepower Rec. 60hp
Horsepower Max 60hp
Pax 5 ppl

Standard Features

  • 3MM PLATE SIDES AND BOTTOM SHEETS
  • CHECKER PLATE FOREDECK
  • FULLY WELDED EXTRUDED SIDE DECKS
  • RIBS SPACED EVERY 300MM
  • PEDESTAL FOLDING SEATS X 2
  • PLUG IN SEAT POSITIONS X 4
  • BOW RAILS AND BOW ROLLER
  • SIDE RAILS
  • FULLY CARPETED CHINE TO CHINE FLOOR
  • UNDERFLOOR FOAM FLOTATION

 

  • ANCHOR SHELF WITH TIE OFF POINT
  • GUNWALE RUBBER
  • TRANSDUCER BRACKET
  • DRAIN BUNGS X 2
  • TRANSOM STRUT
  • BILGE PUMP BRACKET
  • WELDED DECK CLEAT
  • LARGE BOW EYE
  • UNPAINTED 
  • MODEL DECALS
  • AUSTRALIAN BUILDERS PLATE

Popular Options

  • PAINT INTERNAL AND EXTERNAL
  • TWO TONE PAINT
  • REAR STEP AND RAIL
  • FULL BOW RAILS
  • MOTOR WELL
  • FRONT CASTING DECK
  • REAR CASTING DECK
  • CHECKER PLATE FLOOR
  • UNDERFLOOR FUEL TANKS
  • ELECTRIC MOTOR BRACKET

All boats shown with display props and/or options. Refer to the standard features or your dealer for options. Measurements and weights subject to variation and should be used as a guide only.

4.85m Truck Specs

Length Overall 4.85m
Length Bow to Transom 4.85m
Beam 2.20m
Depth 1.20m
Bottom Sheet 3mm 5052 Marine Grade
Side Sheet 3mm 5052 Marine Grade
Transom Long Shaft
Weight (boat only) 365kg
Horsepower Rec. 60hp
Horsepower Max 60hp
Pax 5 ppl

Standard Features

  • 3MM PLATE SIDES AND BOTTOM SHEETS
  • CHECKER PLATE FOREDECK
  • FULLY WELDED EXTRUDED SIDE DECKS
  • RIBS SPACED EVERY 300MM
  • PEDESTAL FOLDING SEATS X 2
  • PLUG IN SEAT POSITIONS X 4
  • BOW RAILS AND BOW ROLLER
  • SIDE RAILS
  • FULLY CARPETED CHINE TO CHINE FLOOR
  • UNDERFLOOR FOAM FLOTATION

 

  • ANCHOR SHELF WITH TIE OFF POINT
  • GUNWALE RUBBER
  • TRANSDUCER BRACKET
  • DRAIN BUNGS X 2
  • TRANSOM STRUT
  • BILGE PUMP BRACKET
  • WELDED DECK CLEAT
  • LARGE BOW EYE
  • UNPAINTED 
  • MODEL DECALS
  • AUSTRALIAN BUILDERS PLATE

Popular Options

  • PAINT INTERNAL AND EXTERNAL
  • TWO TONE PAINT
  • REAR STEP AND RAIL
  • FULL BOW RAILS
  • MOTOR WELL
  • FRONT CASTING DECK
  • REAR CASTING DECK
  • CHECKER PLATE FLOOR
  • UNDERFLOOR FUEL TANKS
  • ELECTRIC MOTOR BRACKET

All boats shown with display props and/or options. Refer to the standard features or your dealer for options. Measurements and weights subject to variation and should be used as a guide only.

5.25m Truck Specs

Length Overall 5.25m
Length Bow to Transom 5.2m
Beam 2.2m
Depth 1.2m
Bottom Sheet 3mm 5052 Marine Grade
Side Sheet 3mm 5052 Marine Grade
Transom L/S
Weight (boat only) 400kg
Horsepower Rec. 60hp
Horsepower Max 60hp
Pax 5 ppl

Standard Features

  • 3MM PLATE SIDES AND BOTTOM SHEETS
  • CHECKER PLATE FOREDECK
  • FULLY WELDED EXTRUDED SIDE DECKS
  • RIBS SPACED EVERY 300MM
  • PEDESTAL FOLDING SEATS X 2
  • PLUG IN SEAT POSITIONS X 4
  • BOW RAILS AND BOW ROLLER
  • SIDE RAILS
  • FULLY CARPETED CHINE TO CHINE FLOOR
  • UNDERFLOOR FOAM FLOTATION

 

  • ANCHOR SHELF WITH TIE OFF POINT
  • GUNWALE RUBBER
  • TRANSDUCER BRACKET
  • DRAIN BUNGS X 2
  • TRANSOM STRUT
  • BILGE PUMP BRACKET
  • WELDED DECK CLEAT
  • LARGE BOW EYE
  • UNPAINTED 
  • MODEL DECALS
  • AUSTRALIAN BUILDERS PLATE

Popular Options

  • PAINT INTERNAL AND EXTERNAL
  • TWO TONE PAINT
  • REAR STEP AND RAIL
  • FULL BOW RAILS
  • MOTOR WELL
  • FRONT CASTING DECK
  • REAR CASTING DECK
  • CHECKER PLATE FLOOR
  • UNDERFLOOR FUEL TANKS
  • ELECTRIC MOTOR BRACKET