Stessl Edge Dinghies / Vee punts / Edgetracker

Edgetracker

line_spacer

The unique Edgetracker hull design was developed and perfected by Stessl and it has become a popular Australian tinnie known for its great handling and stability.

The” Edge” pressing design coupled with the very wide beam gives the boat a smooth ride in flat and choppy water and there is plenty of room for all your fishing gear and equipment.

The Stessl Edgetracker range includes cartopper & trailerable models .Solidly built with fully welded foam filled seats and 3mm rolled ribs the Edgetrackers will get you out on the water safely for years to come.

colorpicker-banner-button-desktop.jpg colorpicker-banner-button-mob.jpg

Series

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

340 Edgetracker Specs

Length Overall 3.4m
Beam 1.5m
Depth 0.6m
Bottom Sheet 1.6mm
Side Sheet 1.6mm
Transom long Shaft
Weight (boat only) 70kg
Horsepower Max 20hp
Pax 3 ppl

Boat Features

  • 2x Rowlocks Blocks
  • Anchor tie off point
  • Back board
  • Cross thwart flotation
  • Double bow eye
  • Foredeck

 

  • Screw in bung x 2 large 25mm
  • Solid transom corners
  • Transom strut
  • Two deck handles - Flat
  • Two transom handles
  • Welded cross thwarts front and rear

 

Factory Options

Paint
Drop-in floor
Electric Bow Mount Plate

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

370 Edgetracker Specs

Length Overall 3.70m
Beam 1.5m
Depth 0.6m
Bottom Sheet 1.6mm
Side Sheet 1.6mm
Transom Long Shaft
Weight (boat only) 80kg
Horsepower Max 20hp
Pax 3 ppl

Boat Features

  • 2 x Rowlocks Blocks
  • Anchor shelf with tie off point
  • Back board
  • Nose cone
  • Bow handle x 2
  • Cross thwart flotation
  • Double bow eye

 

 

  • External keel
  • Foredeck
  • Screw in bung x 2 – 25mm
  • Solid transom corners
  • Transom strut
  • Two transom handles
  • Welded cross thwarts front and rear
  • Gunnel rubber

 

Factory Options

  • Paint
  • Drop-in floor
  • Electric bow mount plate
  • Casting deck

 

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

390 Edgetracker Specs

Length Overall 3.9m
Beam 1.8m
Depth 0.75m
Bottom Sheet 2mm
Side Sheet 2mm
Transom Long Shaft
Weight (boat only) 90kg
Horsepower Max 30hp
Pax 4 ppl

Boat Features

  • Bungs x3
  • Bow Eye
  • Low Bow Rails
  • Low Rear Rails
  • Rowlock Holders
  • 2 Thwart Seats
  • Foredeck
  • Anchor Shelf
  • Tank & Battery Rack
  • Transom Grab Rail
  • Thwart Floatation
  • Transom Strut
  • Bilge Pump Bracket
  • Motor Board
  • Graphics (Stickers)
  • Gunwhale Rubber

Factory Options

  • Paint
  • Rear Step
  • Drop or Built in floor
  • Side Pocket (Port Side)
  • Electric Motor Bow Mount
  • Full Length Rails
  • Transducer Bracket

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

425 Edgetracker Specs

Length Overall 4.25m
Beam 2.0m
Depth 0.75m
Bottom Sheet 2mm
Side Sheet 2mm
Transom Long Shaft
Weight (boat only) 140kg
Horsepower Max 40hp
Pax 4 ppl

Boat Features

  • Bungs x3
  • Bow Eye
  • 2x Rod Holders
  • Low Bow Rails
  • Low Rear Rails
  • Rowlock Holders
  • 2 Thwart Seats
  • Foredeck
  • Anchor Shelf 


  • Tank & Battery Rack
  • Transom Grab Rails
  • Thwart Floatation
  • Transom Strut
  • Bilge Pump Bracket
  • Motor Board
  • Graphics (Stickers)
  • Gunwhale Rubber

Factory Options

  • Paint
  • Rear Step
  • Drop or Built-In Floor
  • Side Pocket (Port Side)
  • Electric Bow Mount
  • Full Length Rails
  • Transducer Bracket

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

435 Edgetracker Specs

Length Overall 4.35m
Beam 2.05m
Depth 0.9m
Bottom Sheet 3mm
Side Sheet 2mm
Transom Long Shaft
Weight (boat only) 160kg
Horsepower Max 40hp
Pax 4 ppl

Boat Features

  • Bungs x3
  • Bow Eye
  • Rod Holders x2
  • Low Bow Rails
  • Low Side Rails
  • Rowlock Holders
  • 2 Thwart Seats
  • Foredeck
  • Anchor Shelf
  • Tank & Battery Rack
  • Transom Grab Rails
  • Thwart Floatation 
  • Transom Strut 
  • Bilge Pump Bracket
  • Motor Board
  • Graphics (Stickers)
  • Gunwhale Rubber

Factory Options

  • Paint
  • Rear Step
  • Drop or Built-In Floor
  • Transducer Bracket
  • Side Pocket (Port)
  • Electric Bow Mount
  • Full Length Rails