PlatetriX2 - Plate Boats

Coast Runner

line_spacer

IT’S HERE! The new Stessl Coastrunner Magnum has been released into the wild and is bigger, stronger and more feature-packed than ever before! A true offshore fishing machine, the Coastrunner Magnum also provides you with the protection of a cabin with overnight sleeping quarters. A sweeping transom design incorporating twin boarding platforms and slanting rear wall has created even more room in an already cavernous rear deck, while the over-engineered Platetrix hull system has been modified to provide even greater strength and allow for long-range fuel tanks. A redesigned folding hardtop now provides a handy radio/electronics box, and subtle changes throughout the boat have propelled the Stessl Coastrunner to the front of the pack!

colorpicker-banner-button-desktop.jpg colorpicker-banner-button-mob.jpg

line_spacer
line_spacer
Series

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

560 Coastrunner Centre Cabin Specs

Length Overall 5.70m
Length Bow to Transom 5.60m
Beam 2.45m
Depth 1.45m
Bottom Sheet 4mm 5083 High Tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL
Weight (boat only) 820 kgs
Horsepower Rec. 115hp
Horsepower Max 140hp
Pax 6 ppl

Standard Features

  • 4mm 5083 high tensile Keel Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front walk around deck
  • Walk around Centre Cabin
  • Folding hard top with radio box and storage shelf
  • Rocket launchers and grab rails
  • Large centre cabin design
  • Large dash fascia for over size electronics
  • Tinted acrylic wrap around windscreen
  • Baystar Hydraulic steering
  • Gussi Sports Steering wheel
  • Helm seat boxes with Deluxe folding helm seats on slides & swivels
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket

 

 

  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • 2 Piece Upholstered bunk cushions 1000mm
  • Long range 175L aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • 6 Riveted aluminium Rod Holders
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted white in and out
  • Custom decals

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Self draining fully welded floors
  • Electric motor mount
  • Underfloor Kill Tank
  • Bait board
  • Bait board with Bait Tank
  • Transom Mounted Bait Tank
  • Folding Rear lounge
  • Rear Peak
  • Front Clears

 

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

590 Coastrunner Centre Cabin Magnum Specs

Length Overall 6.0 m
Length Bow to Transom 5.90m
Beam 2.50m
Depth 1.50m
Bottom Sheet 4mm 5083 High tensile
Side Sheet 4mm 5052 Marine Grade
Transom Xtra Long Shaft
Weight (boat only) 880kg
Horsepower Rec. 140hp
Horsepower Max 150hp
Pax 6 ppl

Standard Features

  • 4mm 5083 high tensile Keel Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front walk around deck
  • Walk around Centre Cabin
  • Folding hard top with radio box and storage shelf
  • Rocket launchers and grab rails
  • Large centre cabin design
  • Large dash fascia for over size electronics
  • Tinted acrylic wrap around windscreen
  • Seastar Hydraulic steering
  • Gussi Sports Steering wheel
  • Helm seat boxes with Deluxe folding helm seats on slides & swivels
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket

 

 

  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • 3 Piece Upholstered bunk cushions 1350mm
  • Long range 250ltr aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • 6 Riveted aluminium Rod Holders 
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted white in and out
  • Custom decals

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Self draining fully welded floors
  • Electric motor mount
  • Underfloor Kill Tank
  • Bait board
  • Bait board with Bait Tank
  • Transom Mounted Bait Tank
  • Folding Rear lounge
  • Rear Peak
  • Front Clears

 

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

630 Coastrunner Centre Cabin Magnum Specs

Length Overall 6.40m
Length Bow to Transom 6.30m
Beam 2.50m
Depth 1.50m
Bottom Sheet 4mm 5083 High Tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL
Weight (boat only) 935kg
Horsepower Rec. 150hp
Horsepower Max 175hp
Pax 7 ppl

Standard Features

  • 4mm 5083 high tensile Keel Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front walk around deck
  • Walk around Centre Cabin
  • Folding hard top with radio box and storage shelf
  • Rocket launchers and grab rails
  • Large centre cabin design
  • Large dash fascia for over size electronics
  • Tinted acrylic wrap around windscreen
  • Seastar Hydraulic steering
  • Gussi Sports Steering wheel
  • Helm seat boxes with Deluxe folding helm seats on slides & swivels
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket

 

 

  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • 3 Piece Upholstered bunk cushions 1350mm
  • Long range 250ltr aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • 6 Riveted aluminium Rod Holders
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted white in and out
  • Custom decals

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Self draining fully welded floors
  • Electric motor mount
  • Underfloor Kill Tank
  • Bait board
  • Bait board with Bait Tank
  • Transom Mounted Bait Tank
  • Folding Rear lounge
  • Rear Peak
  • Front Clears

 

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

660 Coastrunner Magnum Centre Cabin Specs

Length Overall 6.70m
Length Bow to Transom 6.60mm
Beam 2.5m
Depth 1.5m
Bottom Sheet 5mm 5083 High Tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL
Weight (boat only) 1200kg
Horsepower Rec. 175hp
Horsepower Max 200hp
Pax 7 ppl

Standard Features

  • 5mm 5083 high tensile Keel Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Fully welded self draining checker plate floor
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front walk around deck
  • Walk around Centre Cabin
  • Folding hard top with radio box and storage shelf
  • Rocket launchers and grab rails
  • Large centre cabin design
  • Large dash fascia for over size electronics
  • Tinted acrylic wrap around windscreen
  • Seastar Hydraulic steering
  • Gussi Sports Steering wheel
  • Helm seat boxes with Deluxe folding helm seats on slides & swivels
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket

 

 

  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Australian Standards Approved underfloor foam flotation
  • 3 Piece Upholstered bunk cushions 1350mm
  • Long range 250ltr aluminium fuel tank with sender unit
  • Lenco Trim tabs
  • Checker plate fully welded self draining floor with scuppers
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • 6 Riveted aluminium Rod Holders 
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted white in and out
  • Custom decals

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Underfloor Kill Tank
  • Electric motor mount
  • Bait board
  • Bait board with Bait Tank
  • Transom Mounted Bait Tank
  • Folding Rear lounge
  • Rear Peak
  • Front Clears