PlatetriX2 - Plate Boats

Seahawk

Home Boat Range PlatetriX2 - Plate Boats Seahawk
line_spacer

BIGGER & BETTER! The Stessl Seahawk builds on it’s predecessor’s proven pedigree by providing even more cabin and deck space in a boat that’s been engineered to take you further – safer! With an improved Platetrix hull design, more deadrise and massive fuel capacity, the Seahawk provides a softer, more comfortable ride to get you to where the fish are. The true half cabin design provides full 6ft bunks for a contented nights rest, all while still providing acres of deck space for fighting that fish of a lifetime or just purely entertaining.

 

colorpicker-banner-button-desktop.jpg colorpicker-banner-button-mob.jpg

line_spacer
Series
Print - 530 Seahawk Cuddy Cabin

seahawkwireframe.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

530 Seahawk Cuddy Cabin Specs

Length Overall 5.40m
Beam 2.40m
Depth 1.35m
Bottom Sheet 4mm 5083 High Tensile
Side Sheet 4mm 5052
Transom XL
Weight (boat only) 610kg
Horsepower Rec. 90
Horsepower Max 115hp
Pax 5 ppl

Standard Options

  • 4mm 5083 high tensile Keel Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Aluminium Half  cabin with opening hatch
  • Large  cabin design allows for spacious 1500 mm bunks
  • Large dash fascia for over size electronics
  • Tinted acrylic wrap around windscreen
  • SeaStar Extreme steering
  • Gussi Sports Steering wheel
  • Pedestal mounted Deluxe helm seats on slides & swivels
  • Folding rear lounge and backrest
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket

 
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • Long range aluminium 150 lt fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Drivers side footrest
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted White in and out
  • Custom decals
  • Captains Pack

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Underfloor Kill tank
  • Bait Board
  • Bait Board with bait tank
  • Live bait tank in transom
  • Bimini
  • Front Clears
  • Side Clears
  • Electric motor bracket
  • Self draining Welded floors
  • Targa Bar with Rod Holders
Print - 560 Seahawk Half Cabin

seahawkwireframe.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

560 Seahawk Half Cabin Specs

Length Overall 5.70m
Beam 2.45m
Depth 1.45m
Bottom Sheet 4mm 5083 High tensile
Side Sheet 4mm 5052
Transom XL
Weight (boat only) 650kgs
Horsepower Rec. 115 Hp
Horsepower Max 140hp
Pax 6 ppl

Standard Options

  • 4mm 5083 high tensile Keel Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Aluminium Half  cabin with opening hatch
  • Heavy-duty bow sprit with double rollers and rope keepers
  • Large cabin design allows for spacious 1800mm bunks
  • Large dash fascia for oversize electronics
  • Tinted acrylic wrap around windscreen
  • Baystar Hydraulic steering
  • Gussi Sports Steering wheel
  • Pedestal mounted Deluxe helm seats on slides & swivels
  • Portable toilet in separate compartment
  • Folding rear lounge and backrest

 
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • Long range aluminium 175 ltr fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Drivers side footrest
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted White in and out 
  • Custom decals
  • Captains Pack

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Underfloor Kill tank
  • Bait Board
  • Bait Board with bait tank
  • Live bait tank in transom
  • Bimini
  • Front Clears
  • Side Clears
  • Electric motor bracket
  • Self draining Welded floors
  • Targa Bar with Rod Holders
Print - 590 Seahawk Half Cabin

seahawkwireframe.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

590 Seahawk Half Cabin Specs

Length Overall 6.00m
Beam 2.50m
Depth 1.50m
Bottom Sheet 4mm 5083 High tensile
Side Sheet 4mm 5052
Transom XL
Weight (boat only) 710 kgs
Horsepower Rec. 140Hp
Horsepower Max 150hp
Pax 6 ppl

Standard Options

  • 4mm 5083 high tensile Keel Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Aluminium Half cabin with opening hatch
  • Large cabin design allows for spacious 1800mm bunks
  • Large dash fascia for oversize electronics
  • Tinted acrylic wrap around windscreen
  • SeaStar Hydraulic steering
  • Gussi Sports Steering wheel
  • Pedestal mounted Deluxe helm seats on slides & swivels
  • Portable toilet in separate compartment
  • Folding rear lounge and backrest
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor 
  • Australian Standards Approved underfloor foam flotation
  • Long range aluminium 200 ltr fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Drivers side footrest
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted White in and out
  • Custom decals
  • Captains Pack

 

 

 

 

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Underfloor Kill tank
  • Bait Board
  • Bait Board with bait tank
  • Live bait tank in transom
  • Bimini
  • Front Clears
  • Side Clears
  • Electric motor bracket
  • Self draining Welded floors
  • Targa Bar with Rod Holders
Print - 630 Seahawk Half Cabin

seahawkwireframe.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

630 Seahawk Half Cabin Specs

Length Overall 6.40m
Beam 2.50m
Depth 1.50m
Bottom Sheet 4mm 5083 High Tensile
Side Sheet 4mm 5052
Transom XL
Weight (boat only) 765 kg
Horsepower Rec. 150 Hp
Horsepower Max 200 Hp
Max Transom Weight 240kg
Pax 7 ppl

Standard Options

  • 4mm 5083 high tensile Keel Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Aluminium Half cabin with opening hatch
  • Large cabin design allows for spacious 1800mm bunks
  • Large dash fascia for oversize electronics
  • Tinted acrylic wrap around windscreen
  • SeaStar Hydraulic steering
  • Gussi Sports Steering wheel
  • Pedestal mounted Deluxe folding helm seats on slides & swivels
  • Portable toilet in separate compartment
  • Folding rear lounge and backrest
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • Long range aluminium 250ltr fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Drivers side footrest
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted White in and out
  • Custom decals
  • Captains Pack

 

 

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Underfloor Kill tank
  • Bait Board
  • Bait Board with bait tank
  • Live bait tank in transom
  • Bimini
  • Front Clears
  • Side Clears
  • Electric motor bracket
  • Self draining Welded floors
  • Targa Bar with Rod Holders
Print - 660 Seahawk Cuddy Cabin

seahawkwireframe.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

660 Seahawk Cuddy Cabin Specs

Length Overall 6.70m
Length Bow to Transom 6.60m
Beam 2.5m
Depth 1.5m
Bottom Sheet 5mm 5083 High tensile
Side Sheet 4mm 5052
Transom XL
Weight (boat only) 960kg
Horsepower Rec. 175hp
Horsepower Max 250hp
Pax 7 ppl

Standard Options

  • 4mm 5052 Side Sheets
  • 5mm 5083 High Tensile Bottom Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Aluminium Half cabin with opening hatch
  • Large cabin design allows for spacious 1800mm bunks
  • Large dash fascia for oversize electronics
  • Tinted acrylic wrap around windscreen
  • SeaStar Hydraulic steering
  • Gussi Sports Steering wheel
  • Pedestal mounted Deluxe folding helm seats on slides & swivels
  • Portable toilet in separate compartment
  • Folding rear lounge and backrest
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Fully welded Self draining Checker plate floor
  • Australian Standards Approved underfloor foam flotation
  • Long range 250 ltr aluminium fuel tank with sender unit
  • Lenco Trim Tabs
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Drivers side footrest
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted White in and out
  • Custom decals
  • Captains Pack

 

Popular Features

  • Metallic Paint
  • Two Tone Paint
  • Enclosed Hard Top 
  • Bimini
  • Front clears
  • Kill Tank plumbed through transom
  • Transom mounted bait tank
  • Bait Board 
  • Bait Board with Bait tank
  • Targa bar with rocket launchers
Print - 730 Seahawk

seahawkwireframe.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

730 Seahawk Specs

Length Overall 7.70m
Length Bow to Transom 7.30m
Beam 2.5m
Depth 1.5m
Bottom Sheet 5mm 5083 High Tensile
Side Sheet 4mm
Transom XL/S
Weight (boat only) 1400kg
Horsepower Rec. 250hp
Horsepower Max 300hp
Pax 7 ppl

Standard Options

  • 4mm 5052 Side Sheets
  • 5mm 5083 High Tensile Bottom Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Aluminium Half cabin with opening hatch
  • Large cabin design allows for spacious 1800mm bunks
  • Large dash fascia for oversize electronics
  • Tinted acrylic wrap around windscreen
  • SeaStar Hydraulic steering
  • Gussi Sports Steering wheel
  • Pedestal mounted Deluxe  helm seats on slides & swivels
  • Portable toilet in separate compartment
  • Folding rear lounge and backrest
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Fully welded Self draining Checker plate floor
  • Australian Standards Approved underfloor foam flotation
  • Long range 250 ltr aluminium fuel tank with 100ltr Auxiliary tank with sender units
  • Lenco Trim Tabs
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails
  • 32mm Side rails
  • Large side pockets x 2
  • Welded aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Drivers side footrest
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted White in and out
  • Custom decals
  • Captains Pack

 

Popular Features

  • Metallic Paint
  • Two Tone Paint
  • Enclosed Hard Top 
  • Bimini
  • Front clears
  • Kill Tank plumbed through transom
  • Transom mounted bait tank
  • Bait Board 
  • Bait Board with Bait tank
  • Targa bar with rocket launchers
Factory Options

Two Tone Paint

Metallic Paint

Under Floor Kill Tank

Bait Board and Bait Tank

Transom Mounted Bait Tank

Bimini

Electric Motor Mount

Checker Plate Floor

More From PlatetriX2 - Plate Boats

Coastrunner

Seahawk

Trophy Side Console

Trophy Centre Console

Bluewater

Funseeker