PlatetriX2 - Plate Boats

Trophy Centre Console

line_spacer

Stessl Trophy Centre Console - Preferred Fishing Boat of The Mad Hueys

The Stessl Trophy Centre Console models are very versatile and are at home in lakes, estuaries, rivers and oceans.

The sea friendly hull with increased freeboard, a wide beam and reverse chines is very well behaved and easy to handle in all weather conditions.

The solidly built foam filled Platerix hull, which has full height floor to hull frames and bulkheads is stable at rest and exceptionally quiet when underway.

There is plenty of storage under the large front casting deck and in the upholstered seat box.

The centre console layout leaves ample room for fishing and there are numerous options including a sporty aluminium T Top available to customise the boat to suit your needs- please discuss your requirements with your local dealership.

colorpicker-banner-button-desktop.jpg colorpicker-banner-button-mob.jpg

line_spacer
line_spacer
Series

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.


Boat Features

4mm 5083 high tensile Bottom Sheets
4mm 5052 Side Sheets
4mm Bulkheads and frames fully welded to hull – not floating
Full height transom with twin boarding platforms
Fully welded gunnels and side decks
Extruded Side Decks
Enclosed rear transom with twin hatches
Walk through transom door
Large aluminium anchor well
Raised front casting deck with access hatches
Two piece folding Centre Console
Large dash facia for oversize electronics
Molded clear  acrylic  windscreen
SeaStar Extreme steering
Gussi Sports Steering wheel
Upholstered helm seat box with swing backrest.
 
Tinned marine wiring harness with battery switch
5 gang switch panel with 12V socket
12V bilge pump
LED Navigation lights and Anchor light
Carpeted timber floor
Australian Standards Approved underfloor foam flotation
Long range 150L aluminium fuel tank with sender unit
Heavy-duty dive boarding ladder
High 32mm Bow rails 
Heavy-duty bow sprit with double rollers and rope keepers
32mm Transom rails 
32mm Side rails
Large side pockets x 2
Riveted aluminium Rod Holders x 4
Cast alloy cleats x 3
Cup holders x 2
Transducer Brackets x 2
Gunwale rubber 
Painted White in and out
Custom decals
line_spacer

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

490 Trophy Centre Console Specs

Length Overall 5.00 m
Length Bow to Transom 4.90 m
Beam 2.40m
Depth 1.35m
Bottom Sheet 4mm 5083 high tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL/Shaft
Weight (boat only) 560kg
Horsepower Rec. 80HP
Horsepower Max 90HP
Pax 5 ppl

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

530 Trophy Centre Console Specs

Length Overall 5.40m
Beam 2.40m
Depth 1.35m
Bottom Sheet 4mm 5083 high tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL
Weight (boat only) 610kg
Horsepower Rec. 90Hp
Horsepower Max 115hp
Pax 5 ppl

Boat Feature

  • 4mm 5083 high tensile Bottom Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Walk through Transom door
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Two piece folding Centre Console
  • Large dash fascia for oversize electronics
  • Molded clear  acrylic  windscreen
  • SeaStar Extreme steering
  • Gussi Sports Steering wheel
  • Upholstered helm seat box with swing backrest.
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • Long range 150 ltr aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Gunwale rubber 
  • Painted White in and out
  • Custom decals

 

 

 

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

560 Trophy Centre Console Specs

Length Overall 5.70m
Beam 2.45m
Depth 1.45m
Bottom Sheet 4mm - 5083 High Tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL/S
Weight (boat only) 650kg
Horsepower Rec. 115hp
Horsepower Max 140hp
Pax 6 ppl

Boat Features 

  • 4mm 5083 high tensile Bottom Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Walk through Transom door
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Two piece folding Centre Console
  • Large dash facia for oversize electronics
  • Molded clear  acrylic  windscreen
  • Baystar Hydraulic steering
  • Gussi Sports Steering wheel
  • Upholstered helm seat box with swing backrest.
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • Long range 175L aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Gunwale rubber 
  • Painted one colour in and out
  • Custom decals

 

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

590 Trophy Centre Console Specs

Length Overall 6.00m
Beam 2.5m
Depth 1.5m
Bottom Sheet 4mm 5083 high tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL
Weight (boat only) 710 kg
Horsepower Rec. 140HP
Horsepower Max 150hp
Pax 6 ppl

Boat Features 

  • 4mm 5083 high tensile Bottom Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Walk through Transom door
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Two piece folding Centre Console
  • Large dash facia for oversize electronics
  • Molded clear  acrylic  windscreen
  • SeaStar Hydraulic steering
  • Gussi Sports Steering wheel
  • Upholstered helm seat box with swing backrest.
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • Long range 250L aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Gunwale rubber 
  • Painted one colour in and out
  • Custom decals

Options

  • Underfloor Kill Tank
  • Bait board
  • Bait board with Bait Tank
  • Transom mounted Live Bait Tank
  • Aluminium T-Top with Rocket launchers
  • Two Tone Paint
  • Metallic Paint
  • Front Clears
  • Rear Peak

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

630 Trophy Centre Console Specs

Length Overall 6.40m
Beam 2.50m
Depth 1.50 m
Bottom Sheet 4mm 5083 high tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL/S
Weight (boat only) 765kg
Horsepower Rec. 150HP
Horsepower Max 175HP
Pax 7 ppl

Boat Features 

  • 4mm 5083 high tensile Bottom Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Walk through transom door
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Two piece folding Centre Console
  • Large dash facia for oversize electronics
  • Molded clear  acrylic  windscreen
  • SeaStar Hydraulic steering
  • Gussi Sports Steering wheel
  • Upholstered helm seat box with swing backrest.
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • Long range 250L aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Gunwale rubber 
  • Painted one colour in and out
  • Custom decals

Options

  • Kill Tank
  • Baitboard
  • Live Bait Tanks
  • T-Top with Rockets
  • Transom Door
  • Colour Paint

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

660 Trophy Centre Console Specs

Length Overall 6.70m
Beam 2.5m
Depth 1.5m
Bottom Sheet 5mm 5083 High Tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL/S
Weight (boat only) 960 kg
Horsepower Rec. 175HP
Horsepower Max 200HP
Pax 7 ppl

Boat Features 

  • 4mm 5052 Side Sheets
  • 5mm 5083 High Tensile Bottom Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Walk through Transom door
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Two piece folding Centre Console
  • Large dash fascia for oversize electronics
  • Molded clear  acrylic  windscreen
  • SeaStar Hydraulic steering
  • Gussi Sports Steering wheel
  • Upholstered helm seat box with swing backrest.
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Fully welded Self draining Checker plate floor
  • Australian Standards Approved underfloor foam flotation
  • Lenco Trim Tabs
  • Long range 250L aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails 
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails 
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Gunwale rubber 
  • Painted one colour in and out 
  • Custom decals

Options