PlatetriX2 - Plate Boats

Trophy Side Console

line_spacer

Many of Australia’s waterways demand a solidly built boat with a high freeboard, long range capacity and hull that can handle whatever is thrown at it. The Stessl Trophy side console is built for this. The Platetrix hull has full height floor to hull frames and bulkheads, generous freeboard and is foam filled for safety. A large step up casting deck with ample storage space below it is perfect for casting lures and the full height transom at the rear is safe when fishing offshore. Two upholstered pedestal seats behind a sporty side console are positioned slightly aft for a comfortable ride and dry ride. There are a number of options available to customise your Trophy Side Console, talk to your local dealership for more information.

Series

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

490 Trophy Side Console Specs

Length Overall 5.00 m
Length Bow to Transom 4.90 m
Beam 2.4m
Depth 1.35m
Bottom Sheet 4mm 5083 High Tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL
Weight (boat only) 560kg
Horsepower Rec. 80hp
Horsepower Max 90hp
Pax 5 ppl

Standard Features

  • 4mm 5083 high tensile Bottom Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Sports side console with windscreen
  • Large dash fascia for over size electronics
  • SeaStar Extreme steering
  • Gussi Sports Steering wheel
  • Pedestal mounted Deluxe Bolster seats on slides & swivels
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • Long range 150ltr aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted white in and out
  • Custom decals

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Underfloor Kill tank
  • Bait Board
  • Bait Board with bait tank
  • Live bait tank in transom
  • Bimini
  • Electric motor bracket
  • Self draining Welded floors

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

530 Trophy Side Console Specs

Length Overall 5.40m
Length Bow to Transom 5.30m
Beam 2.4m
Depth 1.35m
Bottom Sheet 4mm 5083 High Tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL
Weight (boat only) 610kg
Horsepower Rec. 90hp
Horsepower Max 115hp
Pax 5 ppl

Standard Features

  • 4mm 5083 high tensile Bottom Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Sports side console with grab rail
  • Large dash fascia for over size electronics
  • SeaStar Extreme steering
  • Gussi Sports Steering wheel
  • Pedestal mounted Deluxe Bolster seats on slides & swivels
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • Long range 150 ltr aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted white in and out
  • Custom decals

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Underfloor Kill tank
  • Bait Board
  • Bait Board with bait tank
  • Live bait tank in transom
  • Bimini
  • Electric motor bracket
  • Self draining Welded floors

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

560 Trophy Side Console Specs

Length Overall 5.70m
Length Bow to Transom 5.60m
Beam 2.45m
Depth 1.45m
Bottom Sheet 4mm 5083 High Tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL/S
Weight (boat only) 650kg
Horsepower Rec. 115hp
Horsepower Max 140hp
Pax 6 ppl

Standard Features

  • 4mm 5083 high tensile Bottom Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Sports side console with grab rail
  • Large dash fascia for over size electronics
  • BayStar Hydraulic steering
  • Gussi Sports Steering wheel
  • Pedestal mounted Deluxe Bolster seats on slides & swivels
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • Long range 175 ltr aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted White in and out
  • Custom decals

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Underfloor Kill tank
  • Bait Board
  • Bait Board with bait tank
  • Live bait tank in transom
  • Bimini
  • Electric motor bracket
  • Self draining Welded floors

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

590 Trophy Side Console Specs

Length Overall 6.00m
Length Bow to Transom 5.90m
Beam 2.5m
Depth 1.5m
Bottom Sheet 4mm 5083 High tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL
Weight (boat only) 710kg
Horsepower Rec. 140hp
Horsepower Max 150hp
Pax 6 ppl

Standard Features

  • 4mm 5083 high tensile Bottom Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Sports side console with grab rail
  • Large dash fascia for over size electronics
  • SeaStar Hydraulic steering
  • Gussi Sports Steering wheel
  • Pedestal mounted Deluxe Bolster seats on slides & swivels
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • Long range 250ltr aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted White in and out
  • Custom decals

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Underfloor Kill tank
  • Bait Board
  • Bait Board with bait tank
  • Live bait tank in transom
  • Bimini
  • Electric motor bracket
  • Self draining Welded floors

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

630 Trophy Side Console Specs

Length Overall 6.40m
Length Bow to Transom 6.30m
Beam 2.5m
Depth 1.5m
Bottom Sheet 4mm 5083 High Tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL
Weight (boat only) 765kgs
Horsepower Rec. 150hp
Horsepower Max 175hp
Pax 7 ppl

Standard Features

  • 4mm 5083 high tensile Bottom Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Sports side console with grab rail
  • Large dash fascia for over size electronics
  • SeaStar Hydraulic steering
  • Gussi Sports Steering wheel
  • Pedestal mounted Deluxe Bolster seats on slides & swivels
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Carpeted timber floor
  • Australian Standards Approved underfloor foam flotation
  • Long range 250ltr aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted white in and out
  • Custom decals

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Underfloor Kill tank
  • Bait Board
  • Bait Board with bait tank
  • Live bait tank in transom
  • Bimini
  • Electric motor bracket
  • Self draining Welded floors

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

660 Trophy Side Console Specs

Length Overall 6.70m
Length Bow to Transom 6.60m
Beam 2.5m
Depth 1.5m
Bottom Sheet 5mm 5083 High Tensile
Side Sheet 4mm 5052 Marine Grade
Transom XL
Weight (boat only) 960kg
Horsepower Rec. 175hp
Horsepower Max 200hp
Pax 7 ppl

Standard Features

  • 5mm 5083 high tensile Bottom Sheets
  • 4mm 5052 Side Sheets
  • 4mm Bulkheads and frames fully welded to hull – not floating
  • Full height transom with twin boarding platforms
  • Walk through Transom door
  • Fully welded gunnels and side decks
  • Extruded Side Decks
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Sports side console
  • Large dash fascia for over size electronics
  • SeaStar Hydraulic steering
  • Gussi Sports Steering wheel
  • Pedestal mounted Deluxe Bolster seats on slides & swivels
  • Tinned marine wiring harness with battery switch
  • 5 gang switch panel with 12V socket
  • 12V bilge pump
  • LED Navigation lights and Anchor light
  • Fully welded Checker plate self draining floor
  • Australian Standards Approved underfloor foam flotation
  • Long range 250ltr aluminium fuel tank with sender unit
  • Lenco trim tabs
  • Heavy-duty dive boarding ladder
  • High 32mm Bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32mm Transom rails
  • 32mm Side rails
  • Large side pockets x 2
  • Riveted aluminium Rod Holders x 4
  • Cast alloy cleats x 3
  • Cup holders x 2
  • Transducer Brackets x 2
  • Painted White in and out
  • Custom decals

Popular Options

  • Two Tone Paint
  • Metallic Paint
  • Underfloor Kill tank
  • Bait Board
  • Bait Board with bait tank
  • Live bait tank in transom
  • Bimini
  • Electric motor bracket
  • Carpeted aluminium floor - fully welded self draining